Product Selector

Fusion 5.9
    Fusion 5.9

    Connectors SDKCompatible with Fusion 4.x

    This article describes features or functionality that are only compatible with Fusion 4.x.

    Fusion comes with a wide variety of connectors, but you can also develop custom Fusion connectors using the Connectors SDK.

    To get started, clone the public repository at https://github.com/lucidworks/connectors-sdk-resources/.

    Fusion 4.2.6

    Fusion SDK Connectors Overview

    The connectors architecture in Fusion 4 and later is designed to be scalable. Depending on the connector, jobs can be scaled by adding instances of just the connector. The fetching process for these types also supports distributed fetching, so that many instances can contribute to the same job.

    Connectors can be hosted within Fusion, or can run remotely. In the hosted case, these connectors are cluster aware. This means that when a new instance of Fusion starts up, the connectors on other Fusion nodes become aware of the new connectors, and vice versa. This simplifies scaling connectors jobs.

    In the remote case, connectors become clients of Fusion. These clients run a lightweight process and communicate to Fusion using an efficient messaging format. This option makes it possible to put the connector wherever the data lives. In some cases, this might be required for performance or security and access reasons.

    The communication of messages between Fusion and a remote connector or hosted connector are identical; Fusion sees them as the same kind of connector. This means you can implement a connector locally, connect to a remote Fusion for initial testing, and when done, upload the exact same artifact (a zip file) into Fusion, so Fusion can host it for you. The ability to run the connector remotely makes the development process much quicker.

    Connectors SDK support matrix

    Fusion release

    SDK version

    4.2.6

    1.5.0

    Java SDK

    The Java SDK provides components for making it simple to build a connector in Java. Whether the plugin is a true crawler or a simple iterative fetcher, the SDK supports both.

    The Java SDK includes a set of base classes and interfaces. It also provides the Gradle build utilities for packaging up a connector, and a connector client application that can run your connector remotely.

    Many of the base features needed for a connector are provided by Fusion itself. When a connector first connects to Fusion, it sends along its name, type, schema, and other metadata. This connection then stays open, and the two systems can communicate bi-directionally as needed.

    This makes it possible for Fusion to manage configuration data, the job state, scheduling, and encryption for example. The Fusion Admin UI also takes care of the view or presentation, by making use of the connector’s schema.

    This client-based approach decouples connectors from Fusion, which allows hot deployment of connectors through a simple connect call.

    Security

    Fusion connectors support SSL/TLS. See the security README for setup.

    gRPC

    The underlying client/server technology used by these connectors is a fast and efficient framework from Google called gRPC. The gRPC framework provides flexibility in the way services and their methods are defined. Other benefits of this framework include:

    • HTTP/2 based transport

    • Provides an efficient serialization format for data handling (protocol buffers)

    • Allows bi-directional/multiplexed streams

    • Flow control, also known as back pressure

    Distributed Data Store

    The data persisted by the connectors framework is distributed across the Fusion cluster. Each node holds its primary partition of the data, as well as backups of other partitions. If a node goes down during a crawl, the data store remains intact and usable. Connector implementations do not need to be concerned with this layer, because it is all handled by Fusion.

    Checkpoints in the Connectors SDK

    Use Cases

    Incremental Re-crawl

    Incremental re-crawl can be supported when a Changes API is available (e.g., Jive, Salesforce, OneDrive). When a Changes API is available, it’s necessary to provide an input parameter to be tracked, such as a date, link, page token, or other. The input parameter is generated (retrieved) while running the first job. During the next job, that parameter will be used to query the Changes API and retrieve new, modified, and deleted objects.

    The SDK provides a way to store the input parameters, establishing checkpoints, and use them in the subsequent jobs.

    Checkpoint Design

    Fetcher implementations can emit checkpoint messages by calling:

    fetchContext.emitCheckpoint(CHECKPOINT)_ID, checkpointMetadata);

    After the checkpoint is emitted, Fusion will handle this message as follows:

    • The checkpoint will be stored in the CrawlDB with the appropriate status.

    • The checkpoint will not be used in the current job.

    In subsequent job runs, Fusion will check the CrawlDB for any previously stored checkpoints. If any are available, only those checkpoints will be sent to the fetchers; no other input types will be sent. If checkpoints are not available, all other items in the CrawlDB (Documents, FetchInputs, Errors, etc.) will be sent to the fetchers instead.

    In order to update a checkpoint, it must be emitted using its original ID. The ID is the only way the SDK controller can identify and update a checkpoint.
    First Job Flow

    First Job Flow

    1. The Jobs API sends a start job request to the SDK controller.

    2. The SDK controller queries the SDK CrawlDB to check for items.

    3. It’s the first job, so the SDK CrawlDB is empty. The controller will send the initial FetchInput to the fetcher.

      1. During the job, the fetcher receives a FetchInput.

    4. The fetcher can then emit candidates and/or checkpoints.

    5. When the SDK controller receives a checkpoint message, the checkpoint is stored or updated in CrawlDB. It will also process the other items it has received.

      1. The SDK controller will not send the checkpoint to the fetcher in the same job.

    Second Job Flow

    Second Job Flow

    1. The Jobs API sends a start job request to the SDK controller.

    2. The SDK controller queries the SDK CrawlDB to check for items.

    3. It’s the second job, so checkpoints are stored in the SDK CrawlDB. The controller will send the checkpoints to the fetcher.

    4. The fetcher receives and detects the checkpoints. Then, the fetcher emits candidates and updates the checkpoint. The update may take place at a later point, but the checkout must be updated.

      1. If the checkpoint data matches current data, the fetcher will emit the same checkpoint.

    5. The SDK controller will process the candidates and update the checkpoint data in the SDK CrawlDB.

    Stopping a Running Job

    When a job is stopped, the current state of the job is stored so that it can be completed when the job is resumed.

    Stop Handling Design

    The SDK controller will keep track of the incomplete/complete items during a job. An incomplete item is an item that was emitted as a candidate but has not been sent to the fetcher to be processed. Alternatively, the fetch implementation may not have emitted the FetchResult message for that item. The incomplete item is stored in the SDK CrawlDB and marked as incomplete.

    A completed item is one that was emitted first as a candidate and also sent to the fetcher to be processed. The fetcher completes the process by sending back a FetchResult. This item is then marked as complete by the SDK controller by setting the blockID field in the item metadata to match the blockID of the current job.

    A blockId is used to quickly identify items in the CrawlDB which may not have been fully processed, or completed. A completed job is one that naturally stops due to source data being fully processed, as opposed to jobs that are manually stopped or fail.

    blockId’s identify a series of one or more jobs. The lifetime of a `blockId spans from either the start of the initial crawl (or immediately after a completed one), all the way to completion. The SDK controller will generate and use a new blockId when:

    • The current job is the first job.

    • The previous job’s state is FINISHED.

    When a job starts and the previous job did not complete, the previous job’s state is STOPPED. In this case, the previous job’s blockId is reused. The same blockId will be reused until the crawl successfully completes. The SDK controller will continue checking the CrawlDB for incomplete items, which are identified by having a blockID that doesn’t match the previous job blockID. This approach ensures all items within the job are completed before the next job beings, even if the job was stopped multiple times before completion.

    When an item is considered a new candidate, the item’s blockId does not change. Later, when the item is fully processed by the fetcher, the blockId is added to the item metadata and stored in the SDK CrawlDB. The item is then considered complete but will only be sent to fetchers when a new blockId is generated.

    When all items are complete, the SDK will check for checkpoints, as detailed in Checkpoint Design.

    If there are incomplete items from the previous job stored in the SDK CrawlDB, only those items will be processed during the next job.
    Item Completion Flow

    Item Completion Flow

    1. The SDK controller gets a FetchInput from the SDK CrawlDB and sends it to the fetcher.

    2. The fetcher receives the FetchInput.

    3. The fetcher emits a candidate: Item A.

    4. The controller receives the candidate and stores it in the SDK CrawlDB. Mandatory fields are set to the item metadata, but the blockId field is not set.

    5. Later, in the same job, the candidate Item A is selected by the SDK controller, which sends it to a fetcher.

    6. The fetcher receives the candidate and processes it.

    7. The fetcher emits a Document from the candidate.

    8. The fetcher emits a FetchResult to the SDK controller.

    9. The SDK controller receives both the Document and the FetchResult.

      1. If processing the Document, the item status is updated to Document in SDK CrawlDB.

      2. If processing the FetchResult, the item’s blockId is set to the current job’s blockId.

    Transient candidates

    Some connector plugins require that a new job start from the latest checkpoints and not attempt to reprocess incomplete candidates. For that purpose, emit those candidates with Transient=true. The IncrementalContentFetcher is an example.