Aggregator Functions
 Arithmetic Functions
 String Functions
 Collection Functions
 Statistical Functions
 Logical Functions
 Scripting Functions
 Special Functions
Aggregator Functions provide many ways to customize signals aggregations. These functions execute a specified operation on data coming from source event fields and accumulate the new value in a target field of the aggregated result.
Functions are implemented in a aggregator job definition, as a list within the aggregates
property. Each function definition includes the function type, source fields, target fields, and additional parameters as needed for the function type. Specifically, each function takes the following properties (unless otherwise noted); additional parameters are noted in the function descriptions below.

type: the function type.

sourceFields: the list of fields from source events. Data will be retrieved from these fields as inputs to the function.

targetField: the name of the target field where the aggregated result will be stored.

params: any additional parameters for the specific function type, as described below.
The "sourceFields" and "targetField" field names in function specifications can be optionally prefixed with "event:" or "result:". If there are no prefixes the sourceFields take values from the current event being aggregated, and the targetField takes (or updates) the value in the current partial aggregated result. With these prefixes values can be processed and e.g. the original event can be updated, or event fields can be considered taking into account the accumulated values in the result.
Examples:
Override default input field source:
"sourceField": "result:tweet_split_ss"
Override default target field source:
"targetField": "event:tweet_split_ss"
Arithmetic Functions
Arithmetic functions operate on all valid numeric values (including string fields that are parseable into double numbers) from source fields and compute a single result to the target field.
sum
A sum of numeric values, as a double number.
Example:
{
"type" : "sum",
"sourceFields" : [ "count_i" ],
"targetField" : "sum_count_d"
}
sumOfLogs
A sum of natural logs of numeric value, as a double number.
Example:
{
"type": "sumOfLogs",
"sourceFields": [ "script_d" ],
"targetField": "script_sum_logs_d"
}
sumOfSquares
A sum of squares of numeric value, as a double number.
Example:
{
"type" : "sumOfSquares",
"sourceFields" : [ "params.position_s" ],
"targetField" : "sumOfSquares_position_d"
}
count
A count of source values, as a long number.
Example:
{
"type": "count",
"sourceFields": [ "id" ],
"targetField": "count_d"
}
geoMean
A geometric mean of numeric values, as a double number.
Example:
{
"type" : "geoMean",
"sourceFields" : [ "params.position_s" ],
"targetField" : "geoMean_position_d"
}
mean
An arthimetic mean of numeric values, as a double number.
Example:
{
"type" : "mean",
"sourceFields" : [ "params.position_s" ],
"targetField" : "mean_position_d"
}
min
The minimum numeric value.
Example:
{
"type" : "min",
"sourceFields" : [ "params.position_s" ],
"targetField" : "min_position_d"
}
max
The maximum numeric value.
{
"type" : "max",
"sourceFields" : [ "params.position_s" ],
"targetField" : "max_position_d"
}
decay_sum
A sum of timebased exponentially decayed numeric values. The difference between the aggregationTime and the event time will be decayed using an exponential function with a halflife equaling 30 days.
This function has some additional properties:

halfLife: the number of seconds for the halflife decay function.

timestampField: the name of the field that contains the source event’s timestamp. By default, this is
timestamp_dt
. 
defaultWeight: the weight of an event if all values from source fields are missing. The default is 0.1f, and this is expressed as a float.
Example:
{
"type" : "decay_sum",
"sourceFields" : [ "weight_d" ],
"targetField" : "decay_sum_weight_d",
"params" : { }
}
String Functions
String functions operate all values from source fields treated as strings.
cat
A concatenation of string values.
This function has some additional properties:

separator: the character to use as a delimiter between values. The default is a single space.

maxStringLength: the maximum length of the concatenated values (including separators). When this limit is exceeded, additional values are discarded. The default value is 10485760 characters (10 * 1024 * 1024).

maxValueCount: the maximum number of values to concatenate. Any values collected after this limit are discarded. The default is 100.
Example:
{
"type" : "cat",
"sourceFields" : [ "user_id_s" ],
"targetField" : "cat_user_id_txt",
"params" : { }
}
ucat
A concatenation of unique string values.
This function has some additional properties:

separator: the character to use as a delimiter between values. The default is a single space.

maxStringLength: the maximum length of of the concatenated values (including separators). When this limit is exceeded, additional values are discarded. The default value is 10485760 characters (10 * 1024 * 1024).

maxValueCount: the maximum number of values to concatenate. Any values collected after this limit are discarded. The default is 100.
Example:
{
"type" : "ucat",
"sourceFields" : [ "user_id_s" ],
"targetField" : "ucat_user_id_txt",
"params" : { }
}
split
A simple regexbased string splitting function.
The following function params are supported:

regex  (string, required) a regular expression used for splitting.

lower  (boolean, optional, false by default) after the regex has been applied the resulting parts are optionally lowercased (using US locale).
Example:
{
"type" : "split",
"sourceFields" : [ "query_s" ],
"targetField" : "event:query_split",
"params" : {
"regex": "\\s+",
"lower": true
}
}
In the example above, the raw signal event field "query_s" is first split on whitespace and then lowercased, and the result is put back into the raw signal event field "query_split".
replace
A simple regexbased string replace. The java.util.regex.Pattern syntax is supported for the regex matching and replacement.
The following function params are supported:

regex  (string, required) a pattern to match.

replace  (string, required) replacement.
Example:
{
"type" : "replace",
"sourceFields" : [ "query_split" ],
"targetField" : "event:query_split_clean",
"params" : {
"regex": "\\P{Alpha}+",
"replace": "_"
}
}
In the example above, this function takes the "query_split" values and replaces all nonalphabetic characters with underscores, and stores the result in the event’s field "query_split_clean". As an extended example, this function would follow after the example split function and would add the field "query_split_clean" to the raw signal event. The "query_split_clean" field could be aggregated via other aggregation functions.
Collection Functions
Collection functions simply collect values from the source fields and add them as multiple values to the target field.
discard
This function discards all values from source fields and the target field. This modifies the source event and any inprogress aggregation result. This creates sideeffects for subsequent functions, so should be used with care.
Example:
{
"type" : "discard",
"sourceFields" : [ "user_id_s" ],
"targetField" : "collect_user_id_ss",
"params" : { }
}
collect
Collect values from source fields.
This function has one additional property, 'maxValueCount', which defines the number of fields to collect from source fields. Any fields collected after this limit are discarded. The default is 100.
Example:
{
"type" : "collect",
"sourceFields" : [ "user_id_s" ],
"targetField" : "collect_user_id_ss",
"params" : { }
}
ucollectCollect unique values from source fields.
This function has one additional property, 'maxValueCount', which defines the number of fields to collect from source fields. Any fields collected after this limit are discarded. The default is 100.
Example:
{
"type" : "ucollect",
"sourceFields" : [ "user_id_s" ],
"targetField" : "unique_user_id_ss",
"params" : { }
}
Statistical Functions
Statistical functions compute scalar and matrix statistics. When the function has multiple results, such as for matrix or vector results, the data is stored in multiple fields.
varianceThe square of standard deviation of numeric values, as a double number.
Example:
{
"type" : "covariance",
"sourceFields" : [ "params.position_s", "position_rnd_1", "position_rnd_2" ],
"targetField" : "cov_position_d",
"params" : { }
}
stddev
The standard deviation of numeric values, as a double number.
Example:
{
"type" : "stddev",
"sourceFields" : [ "params.position_s" ],
"targetField" : "stddev_position_d",
"params" : { }
}
cardinality
An estimate of the number of unique elements in the set of values from source fields (which are treated as strings). This uses the HyperLogLog implementation.
This function has one additional property, 'error', which defines the acceptable probability of error from real value, specifically the standard deviation from real results. Smaller values cause exponentially higher RAM consumption during processing. For example, the default, 0.1, uses ~8Kb of RAM, while tests have shown 0.0001 uses ~64Mb.
Example:
{
"type" : "cardinality",
"sourceFields" : [ "params.position_s" ],
"targetField" : "cardinality_position_l",
"params" : { }
}
skewness
The measure of asymmetry of the distribution around its mean. This function is performed on numeric values and is expressed as a double number.
Example:
{
"type" : "skewness",
"sourceFields" : [ "params.position_s" ],
"targetField" : "skewness_position_d",
"params" : { }
}
kurtosis
The adjusted Pearson’s kurtosis of numeric values, expressed as a double. This provides a comparison of the shape of the distribution to that of the normal distribution.
Example:
{
"type" : "kurtosis",
"sourceFields" : [ "params.position_s" ],
"targetField" : "kurtosis_position_d",
"params" : { }
}
quantiles
The quantiles of numeric values, stored as a double number in 0N.targetField, or as a list of values in the target field (depending on the 'multivalued' property, described below). This implementation uses the TDigest structure.
This function has the following additional properties:

quantiles: the number of quantiles. The default is 10.

multiValued: when true, all quantiles will be stored as multiple values in the target field. If false, then multiple values will be created in the format '0.targetField' to 'N.targetField'.
Example:
{
"type" : "quantiles",
"sourceFields" : [ "params.position_s" ],
"targetField" : "quantiles_position_ss",
"params" : {
"multiValued" : true
}
}
topk
An estimate of the topK elements in the source fields and their frequency. The result is stored in three multivalued fields, each with the same number of values. The three fields are:

counts.targetField: integer counts (frequencies) of elements.

values.targetField: elements.

errors.targetField: estimation errors.
This function has one additional property, 'k', which is the number of elements to report. The default is 10.
Example:
{
"type" : "topk",
"sourceFields" : [ "params.position_s" ],
"targetField" : "topk_position_ss",
"params" : { }
}
covariance
A covariance matrix of numeric values from N > 1 source fields, with no smoothing. Missing or invalid values are treated as 0.0. A row of missing values is ignored. The resulting covariance matrix is stored in N * (N  1)
fields following the naming pattern 'sourceField1.sourceField2.targetField'.
If source fields contain multiple values, only the first value from each source field will be used.
This implementation runs in a constant and small memory budget.
Example:
{
"type" : "covariance",
"sourceFields" : [ "params.position_s", "position_rnd_1", "position_rnd_2" ],
"targetField" : "cov_position_d",
"params" : { }
}
correlation
A correlation matrix of numeric values from N > 1 source fields. This implementation is based on the covariance function. The resulting correlation matrix is stored in N * (N  1)
fields following the naming pattern 'sourceField1.sourceField2.targetField'.
Example:
{
"type" : "correlation",
"sourceFields" : [ "params.position_s", "position_rnd_1", "position_rnd_2" ],
"targetField" : "corr_position_d",
"params" : { }
}
histogram
An approximate histogram of values and their counts in source fields, using the TDigest algorithm. Results are stored as corresponding multiple values in 'means.targetField' (for double values) and 'counts.targetField' (for integer values).
Example:
{
"type" : "histogram",
"sourceFields" : [ "params.position_s" ],
"targetField" : "histogram_position_ss",
"params" : { }
}
sigmoid
This function uses hyperbolic tangent (tanh) to limit the impact of source values according to an sshaped curve. The following parameters control the shape of the curve:

weight  controls the range of values. Default weight is 1.0, which means that the sigmoid function values will range between (1, 1). E.g. weight = 2.0 means that values will range between (2, 2).

intercept  sets the constant shift of function values. Default is 0, which means that sigmoid(0) = 0 and sigmoid(Inf) → 1. E.g. intercept = 2.0 means that sigmoid(0) = 2.0 and sigmoid(Inf) = 3.0.

slope  this parameter controls the slope of the function, i.e. how quickly it reaches saturation. Default value is 1.0. E.g. slope = 2 will cause the function to saturate quickly, slope = 0.1 will cause the function to saturate for larger values of source.

final  boolean, default is true. This controls how the sigmoid is applied to the source value. First, all numeric values from source fields are summed. Then, if final = false the current sum is passed to the sigmoid function and added to the previous total. If final = true then the current sum is added to the total and the sigmoid function is applied only at the end of the aggregation.
Example:
{
"type" : "sigmoid",
"sourceFields" : [ "params.position_s" ],
"targetField" : "sigmoid_position_ss",
"params" : {
"weight" : 2.0,
"intercept" : 10.0,
"slope" : 0.5,
"final" : true
}
}
Logical Functions
when
A logical function where processing will continue only if this function evaluates to true.
This function takes one additional property, 'expr', which is a JavaScript expression that must evaluate to a Boolean true/false. This property takes the same objects as the 'expr' function, described above. If this property is missing, the function will evaluate to true when any sourceField or targetField is present.
Example:
{
"type" : "when",
"sourceFields" : [ "params.position_s" ],
"params" : {
"expr" : "parseFloat(params_position_s) < 3"
}
}
unless
A logical function where processing will continue only if this function evaluates to false.
This function takes one additional property, 'expr', which is a JavaScript expression that must evaluate to a Boolean true/false. This property takes the same objects as the 'expr' function, described above. If this property is missing, the function will evaluate to false when any sourceField or targetField is present.
Example:
{
"type" : "unless",
"sourceFields" : [ "params.position_s" ],
"params" : {
"expr" : "parseFloat(params_position_s) > 1"
}
}
Scripting Functions
script
A scripted function. Scripts are evaluated as snippets, not as a function, and are expected to operate directly on the source event and the result. Their final values are discarded, since snippets in JavaScript are treated as expressions that evaluate to a specific value.
This function ignores the sourceFields and targetFields properties. Instead, the snippets are passed the following properties:

startScript: the script defined is executed when the aggregation for the next unique tuple starts.

aggregateScript: the script defined is executed for each source event.

finishScript: the script is defined when all events for the current tuple have been processed and the result is about to be returned.
Example:
{
"type" : "script",
"sourceFields" : [ ],
"params" : {
"aggregateScript" : "result.addField('script_event_id_ss', event.getFieldValue('id'));"
}
}, {
"type" : "script",
"sourceFields" : [ ],
"params" : {
"aggregateScript" : "event.addField('position_rnd_1', event.getFieldValue('params.position_s') + 1.0  Math.random());event.addField('position_rnd_2', event.getFieldValue('params.position_s') + 5.0  Math.random() * 10.0);"
}
}
expr
A script expression. The script is evaluated as a snippet, and its final value is assigned to the targetField.
This function has only one additional propery, 'expr', which contains the script expression.
Example:
{
"type" : "expr",
"sourceFields" : [ "query_s", "filters_s" ],
"targetField" : "expr_s",
"params" : {
"expr" : "v = ''; if (value != null) v = value + ' '; v + query_s + '_' + filters_s"
}
}, {
"type" : "expr",
"sourceFields" : [ "params.position_s" ],
"targetField" : "expr_d",
"params" : {
"expr" : "v = 0; if (value != null) v = parseFloat(value); v + parseFloat(params_position_s)"
}
}
Special Functions
noop
A function that does nothing (is nonoperational). This is a fallback function when invalid function parameters or execution errors are encountered.
Example:
{
"type" : "noop"
}